was successfully added to your cart.

Cart

Medical products

How To Know If Your Mask Is The Real 3-Ply Surgical Mask?

By May 5, 2020 No Comments

Test It Before You Place Large Orders!

#StaySafe — all you need to know before buying a virus protection mask

The 3-ply surgical mask has become the most sought-after commodity during the Covid-19 pandemic, with many buying what they can get their hands on. However, the quality of different brands may vary wildly, though the masks may look the same.

How do you tell if a surgical mask is real or fake? Check it out below!

  1. Visual Test

If you cut open your mask, you should see a very obvious 3-layers. The 3 layers would typically consist of an outer hydrophobic non-woven layer (translucent), middle melt-blown layer (white), and an inner soft absorbent non-woven layer (green, blue, or white).

If you don’t have those 3 layers, then it is not a 3-ply mask.

Visual test Non-flammability Test

  1. Non-flammability Test

The middle layer of a surgical mask is a melt-blown fabric, not made with paper, therefore, if you light it with a flame, it will not burn like paper. Instead, it melts without flame.

If your mask catches fire, then it is not a 3-ply mask.

Non-flammability test

  1. Water-resistant Test

The outer-most layer is designed to be waterproof. Pour some water onto the outer layer and you should be able to see that the mask repels water properly.

If the other side gets damp, it is not a 3-ply mask.

3ply water-resistant test 

  1. Electrostatic Adsorption Test

There is an electrostatic effect in the melt-blown layer. If you tear the melt-blown layer into strips, you will feel the electrostatic adsorption effect, and you can also adsorb the melt-blown layer on stainless steel due to its large amount of electric charge.

If your mask does not electrostatically adsorb any strips, it is not a 3-ply mask.

Electrostatic adsorption test

  1. Light Transmission Test

The middle layer, which is used to trap bacteria from entering or exiting the mask, should not be too porous. This will ensure the mask can catch the percentage of bacteria it’s supposed to.

If your mask’s middle layer is too porous, it is not a 3-ply mask.

  1. Breath Test

3-ply surgical mask is designed with a middle melt-blown layer that is critical as a filter to contain droplets by electrostatically adsorbing them on the surface hence it cannot infiltrate the mask; while the inner layer is intended to absorb water, sweat and spit. This will ensure extinguishing fire with your breath is highly impossible.

If you can extinguish a fire easily with your breath while wearing the mask, it is not a 3-ply mask.

  1. Absorbency Test

The innermost layer is designed to absorb moisture such as saliva, mucus and sneeze droplets. This ensures when a user sneezes, the mask will be able to contain the droplets, which will not remain smeared on the wearer’s face.

If your mask’s inner layer is not water-absorbent, it is not a proper 3-ply mask.

Know the difference before placing an order

The biggest difference between a 3-ply surgical mask and an ordinary face mask is the melt-blown layer in a surgical mask.

The melt-blown layer in a 3-ply surgical mask is essentially a filter, the droplets containing viruses will be electrostatically adsorbed on the surface and cannot infiltrate the mask. If your mask is properly fitted, the surgical mask will create a basic barrier between your mouth and nose and the viruses.

In need of 3-ply surgical mask? CLICK HERE TO PLACE YOUR ORDER

 

Facebook

YouTube